Ski Goggles — User Manual & Safety
Last updated: 27 September 2025
1. Intended Use
Goggleface ski goggles are intended for downhill skiing and snowboarding. They are Personal Protective Equipment (PPE) Class I and comply with EN ISO 18527-1:2022 (personal eye protection — ski goggles).
Compliance: This product complies with the essential health and safety requirements of Regulation (EU) 2016/425 as Class I PPE, via the harmonized standard EN ISO 18527-1:2022.
2. Lens Tint Categories (S0–S4)
Use the table below to select the appropriate lens tint for conditions. (Notation S0–S4 per EN ISO 18527-1:2022)
hier komt uitleg met verschillende soorten lenzen
Note: Either wording and/or standard graphical symbols may be used on product or packaging to denote tint category.
3. Fitting and Adjustment
- Place the goggles on your helmet or directly on your head.
- Adjust the strap to the correct size with the adjustment buckle.
- Do not obstruct the ventilation openings; blocked vents increase fogging risk.
- Minimum operating temperature: −10 °C.
Fogging: Users may experience fogging during extreme temperature changes (for example, moving from warm indoors to cold outdoors).
4. Safety Warnings and Restrictions of Use
- Not for driving or road use.
- Not for direct observation of the sun.
- Not for protection against artificial light sources (e.g., solaria).
- Not for protection against mechanical hazards such as impact.
- Do not use damaged goggles. Scratches can interfere with your field of vision; if the lens quality deteriorates, replace the goggles or lens. Periodic lens replacement is recommended.
5. Care, Cleaning and Maintenance
- Storage: Keep goggles in the provided protective case or pouch when not in use.
- Cleaning: Rinse under running water to remove dirt or salt; dry with a soft cloth.
- Anti-fog inner lens: Do not rub or wipe the inner surface with force — this can damage the anti-fog coating.
- No chemicals: Do not use chemical detergents, solvents or sprays.
6. Sizes and Models
Sizes and models may vary by product. Refer to the specific product page for model name and size details.
7. Compliance Statement
This product complies with EN ISO 18527-1:2022 for ski goggles and with the essential health and safety requirements of Regulation (EU) 2016/425 as Class I PPE.
Country of origin: China (PRC)
8. Warranty and Terms of Use
Warranty coverage and terms of use are provided digitally on this page.
All relevant information regarding product use, care, maintenance, safety, and compliance is included here.
By using this product, you confirm that you have read and agree to these terms.